For those who have just learned how to open mold, the mold open mode needs to be equipped with what may not be familiar, yi jia three silica gel column a list to share to everyone.
Liquid silicone
Liquid silicone also called silicon likang or silica gel, is rolling over in the process of making silicone mold the main consumables, translucent and white two kinds, it is recommended to use white, and the number of rolling over than translucent better liquidity.
Curing agent
The curing agent is to solidify the liquid silica gel, add silica gel according to the requirement of the manufacturer, and cover the mould with full agitation. The curing agent adds too much, the silica gel will quickly harden, may not be finished before the disposal. Adding too little, curing time is very long, and may not cure at all.
Release agent
The deformable agent is sprayed, can also be replaced by the medical vaseline, and can be replaced with oil such as ointment, the purpose is to separate the silica gel mould.
Industrial plasticine
Industrial plasticine as the main material of making reflection before pouring silicone mold, more soft, can use oil sludge, and soil instead of, can use repeatedly, with more a large number of rolling over.
Rolling over blocks
For the non-essentials, you can use ABS board, board with cardboard, and pay attention to tightness, if it is smooth on the surface of cardboard.
Electronic weigher
Electronic scales are used to weigh the weight of silica gel and curing agent.
