Method for making the soap silicone mould

The silicone mould is the simplest method in the rapid mould, which is usually used to remodel the prototype with silica gel.

Take a piece of handmade soap, put it on the plane, and make it high in the surrounding gear, then mix the silica gel and the curing agent 100:2 ratio, then pour into the clean material that will be copied. In order to save the material, the thinner silica gel products mold, also can divide the brush. To increase the tension of the mold the gauze cloth and so on. At room temperature 20 degrees can be turned into elastomers, and then the female die will be removed along the predetermined parting line.
Soap silicone molds
considerations
Silicon mold (1) to ensure that the soap can maintain good quality and the quality, there should be room temperature 25 ℃ dry environment and the sealing of the container, do not and moisture or water fluoride exposure to prevent deterioration.
In order to prevent the deformation of the soap silicone mould, it is recommended to be put into use after 24 hours, when the performance of the mould is more stable, and the effect will be better.