1. Mix the two components of A and B together by weight 1:1 and evenly. After vacuum, it can be watered. Room temperature (28 degrees) 30 minutes operation time, 2-3 hours completely cure; The temperature of 60-120 degrees can be completely cured within a few minutes.
2. To separate the containers from the use of the condensing silicone, you should use the silicone gel tool without using the room temperature silicone.
3. Before using, make a skin test on the die to see if it will solidify and then put into use
Technical candle mold silicone attention matters
1. The components of A and B must be fully mixed to avoid uneven, otherwise it will affect the performance of the mould glue.
2. A and B shall be stored separately, and shall be used up in A short time after use and preparation.
3. Apply the original model with shampoo solution or soapy water. After the water evaporates, then the mould glue can be filled or brushed to make it better.
4. If it is necessary to reduce the hardness of the material, the weight of the group A shall be 5 to 10 percent of the thin and thin packing and storage of the silicone oil.
